2014年12月27日星期六

Stars led blue beacon light The following details of solar barricade lights

Solar barricade lights standard:
The top 1 high-rise buildings must be located in warning signal light one or several solar barricade lights, the navigational safety.
2 buildings higher than 45 meters above the surrounding ground must be in the middle layer of additional obstacle lights, with low intensity, between the obstacle lamp distance must be less than 45 meters.
More than 3 high buildings 150 meters,Solar warning light  then the top must be set high intensity of solar barricade lights, and in the light barrier lamp used in combination to show its existence.

2014年12月24日星期三

solar power beacon light General traffic barricade light introduction and use

Traffic barricade light! And the ordinary lamps are not the same, the material is power supply system by imports efficient battery plate, maintenance free accumulator, Solar Warning Light running through the low power consumption control circuit, charge during the day, night shining, ensure the safety of maritime, air navigation, guidance, and ensure the battery can work in normal state, obstacle lamp used for a long time normally, can work in harsh environments.
Traffic barricade light is a kind of red safe light or flashing, is mainly used to obstacle guiding potentially hazardous to aviation, no external power supply, a high-efficiency silicon panels, specially configured for high efficiency and low temperature maintenance free battery power supply system, and can ensure Safety Warning Light the continuous rainy days to normal work 20 days.
Method of use:
1 in the long time preservation, staff need to obstacle lights placed in dry place, from time to time, required maintenance time.
2 before the installation and use, will switch to the on position.
3 if traffic barricade light lamp does not light or light is weak, the solar aviation obstacle lamp exposure in the sun can shine 4 hours.
Summarizes the methods and properties of the above traffic barricade light, to make up the difference with the ordinary lamp, lantern is not long on but ablaze, the other is mounted on the highest point of the building and the edge, no matter what kind of obstacle lamp types, staff need to use at the installation warning signal light when considering obstacle lights at the same time and sequence flicker, in order to achieve obvious warning effect.

2014年12月21日星期日

rotating beacon light The reasonable layout of LED barricade lights

1.led barricade lights must clear out the highest point of the obstacles and the edge set obstacle lights, middle layer spacing must be less than 45 meters, the city Zhongbai meters rechargeable traffic baton high buildings especially considering the intermediate layer and barrier.
Intensity of 2 <150 m tall obstacles for high-voltage transmission cable, tower can be white at the top of the marker lamp.
Installation location should not be 3.led barricade lights more than 45 meters, the chimney or other similar nature of the building, the top obstacle lights should be located in the top 1.5-3 meters between, considering the chimney to light pollution, obstacle lights position can be located below the chimney mouth 4-6 meters.
4.led barricade lights should be higher than the extra industrial warning light object 150 meters shall, in high intensity obstacle lights with the use of.

2014年12月15日星期一

What is the role of Traffic warning light

For the full protection of police in the field of personal safety, embodies the concept of people-oriented love convoy police law enforcement, Zhaoqing City Public Security Bureau led blue beacon light police detachment of the first brigade in the first accident treatment police with a wearing type luminous safety warning lamp, security police field especially the night work safety.
As the police to deal with accidents in road work a long time, if in the evening, even wearing a vest, not warning function under the condition of no light sources, have the police proposed luminous warning lamp unified allocation unit worn on the body: the luminous warning lamp using light-emitting diode LED manufacturing, there are three kinds of light mode, a red light penetration, good warning effect, but the lamp has the advantages of small volume, only matchbox size, easy to wear. Huang Bingjin brigade leader immediately after listening to the advice, and actively strive for superior support, as the road all the police, warden, each configured with a set of the equipment. Group bought the first batch of 25 safety lamp dispensed to the shoulder accident police. After testing, the police handling of incidents with a small light warning light solar barricade lights work on the road, can see the flash in 500 meters. Little warning lamp always protect the police security, also warning the passing vehicles Caution.

2014年12月12日星期五

solar power beacon light Traffic warning light product features

1, the Traffic warning light uses the environmental protection type cold light source design, not hot, high photoelectric conversion efficiency, strong direction.
2, long service life; the effective service life rotating beacon light of 100000 hours or more.
3, low power consumption, small power consumption distribution is reasonable, effectively improve the efficiency.
4, the warning light has good dustproof, waterproof performance.
Traffic warning light application: widely used in public security, military, transportation, machinery and equipment, entertainment and many other fields.
All kinds of signs: (1) warning signs to warn vehicles, pedestrians pay attention to signs of dangerous locations; (2) prohibition sign is a sign to prohibit or restrict the vehicles, pedestrian traffic behavior; (3) indicating an indicator of vehicle, pedestrian road; (4) the sign is pass on the road direction, mark spot, distance information. Auxiliary signs attached to the main symbol, the play a supporting role in mark, at that time, vehicle type, region or the distance, warning, prohibition and other types of reasons.
How according to the color recognition information beacon warning light traffic signs?
Traffic signs color representation of traffic information specific. People can get relevant information according to various color logo.

2014年12月9日星期二

rotating beacon light Selection and application of LED traffic signs reflective material

1) led traffic signs principle on the road at all levels should use reflective material logo made surface.
2) traffic signs, a road and city trunk road safety warning light should adopt a ~ three grade reflective film; two or three highway and the general city road led traffic signs should adopt the reflective film of level four or above. Four or five grade reflective film can be used for other road four highway and traffic volume is very small.
3) curve section of highway, a highway, city expressway on the sign, multiway intersection and city area, should adopt the above three levels of reflective materials.
4) of portal city expressway, expressway and cantilever logo, to obtain and roadside sign reflecting effect of quite, should choose road side marker for reflecting film rating for the reflective material is high, or the door frame and cantilever mark symbol characters on the switch to the reflector, to improve the solar power beacon light visibility of the night. In important sections of the condition, also can use lighting sign.
C led traffic signs) rules and reference color samples of color.

2014年12月3日星期三

Stars led blue beacon light Performance characteristics of Traffic control baton

1.Traffic control baton uses 6 tree of a new generation of green LED light source, high luminous efficiency, long life, the average service life of 100000 beacon warning light hours.
2 high against the strengthened structure design and optimization of ABS; waterproof and dustproof anti power, can be used in a variety of harsh conditions.
3 the advantages of beautiful appearance, small size stars led blue beacon light, light weight, portable, waist and other carrying mode.
4 color to red, for other colors can be produced.
5 light weight. The adoption of new technology, new technology, lamps and lanterns weighs only 138g, reduce the operating personnel, carrying the burden of transportation.
6.Traffic control baton irradiation distance. led blue beacon light The use of advanced optical materials are light, high brightness, within 1000 meters of visually, rain and fog penetration ability for 300 ~ 500 meters.
emergency beacon lights

2014年11月17日星期一

Stars led blue beacon light Car beacon lights comprehensive photometric characteristic test

Supporting the use of navigation mark lamp power supply equipment and control equipment should be test design specification of Car beacon lights. The input supply cat eye reflective road stud voltage system deviates from its ratings up to 10% luminous intensity of soil and environmental temperature was the highest and the lowest limit of measurement in conditions of the capacitance discharge type flash of the pharos. Red light intensity can be red filter according to the verified by the corresponding to the light source by the use of light transmittance and color coordinate conversion from the white light intensity value. If the power equipment Car beacon lights is the lamps and lanterns mounted separately stars led blue beacon light, shall be effective intensity and distribution according to the manufacturer the maximum and minimum allowable distance and the recommended cable to connect the two measurement navigation lights.
Structural requirements
Car beacon lights structure shouldled strobe beacon warning light  be strong, as light as possible, can run in the environment under the influence of long-term. Enclosure protection box lamps and containing electronic circuit should be IP55.

2014年11月4日星期二

About rotating beacon light batteries

Since the input energy rotating beacon light of photovoltaic power generation system is very unstable, so generally you need to configure the battery system to work. Generally lead-acid batteries, Ni-Cd battery, Ni-H batteries. Choice of battery capacity rotating beacon light 12v in general should follow the following principles: First, to meet the premise of lighting at night, the daytime solar energy stored in the battery pack down as much as possible, but also capable of storing electrical energy to meet the needs of consecutive rainy days of night lighting. rotating beacon light battery capacity is too small can not meet the needs of beacon strobe light  at night, the battery is too large, on the one hand the state of the battery power is always in deficit, the impact of battery life, while wastage. Batteries should match the solar electricity load (lights) phase. A simple method can be used to determine the relationship between them. rotating beacon light battery power must be higher than the load power more than four times the system to work properly. Solar cell voltage exceeds the warning signal light  working voltage of 20 to 30%, in order to ensure the normal negative charge to the battery. Battery capacity must be higher than the load daily consumption of more than six times better.

2014年10月31日星期五

led blue beacon light fixtures Appearance Description

led blue beacon light generally use low-pressure sodium lamps. High and low pressure sodium lighting efficiency but low pressure sodium expensive. We collect the lamp housing many foreign solar lights information in between aesthetics and energy efficiency, led blue beacon light most have chosen to save energy. Exterior lighting requirements not high, relative utility on the line. Currently there are a lot of lamps look very beautiful, made ​​of stainless steel housing. But the performance in the end what? This brings us food for thought! A good solar lighting products, the key lies in the system design, what is a reasonable system design? Let us first look at several important factors that affect the system, beacon strobe light which is the total amount of radiation latitude, solar square surface, the longest number of days without sunshine, daily power consumption and average sunshine hours. Let us imagine: If the solar charging levels are low, how will it discharge per day? For several years rainy days system also lit? These questions have our design staff seriously. Finally, I give you about a simple method to judge led blue beacon light with system performance: First, beacon warning light  will be higher than the load power more than four times the system to work properly. Second, the battery capacity must be more than four times higher (western region) than the load on power consumption, the southern region of more than 6 times higher as well.

2014年10月27日星期一

Battery plate solar power beacon light and controller is introduced

1, solar power beacon light panels:
The solar battery board is the core part of the solar street lamp, part of the highest value is solar street lamp. Its role is to the sun's radiation is converted to electricity, or sent to the solar power beacon light  battery. In a number of solar cell is more common and more practical silicon solar battery, solar battery polysilicon and amorphous silicon solar cells three. In the solar power beacon light light enough thing ministry area with good sunshine, polycrystalline silicon solar cell as well, because the polycrystalline silicon solar cell production process is relatively simple, low prices than single crystal. More, beacon flashing lights in the rainy days of sunshine is relatively not enough southern area, using the single crystal silicon solar cell as well, because the performance parameters of single crystal silicon solar cell is relatively stable. Amorphous silicon solar battery is good in the outdoor sunshine under the condition of insufficient, because the amorphous silicon solar cells to solar illumination conditions require relatively low.
2, the solar power beacon light controller
Both solar power beacon light lamp size, a good performance of the charge and discharge controller is essential. In order to prolong the service life of the battery, charge and discharge conditions on it must be restricted, to prevent the battery from beacon warning light  and deep charging. In the large temperature difference of the place, the controller should have qualified temperature compensation function. At the same time, solar power beacon light controller should have street lamp control function, with light control, time control function, and should have the night automatic switching control load function, easy to extend the working time of day of overcast and rainy street.

2014年10月23日星期四

The principle of the rotating beacon light knowledge

Rotating beacon light can rotary lamp: LED fluorescent lamp into the bracket, LED fluorescent lamp rotating beacon light  direction can be rotated to change the LED fluorescent lamp.
LED fluorescent lamp is not rotatable lamp: LED fluorescent lamp into the bracket, LED fluorescent light emitted by the light direction is fixed, can not adjust.
The knowledge related to the beacon strobe light  knowledge in high school, rotating beacon light of the shaft end should have a coil around a few times, due to magnetic flux changes resulting in coil current occurs inside the structure, then I do not know, estimation is a bit like the electric fan, but just knowing to produce warning signal light  current, then the problem is still a good solution.
Rotating beacon light the reason that the magnetic flux will change, because we usually electric, are used in alternating current. If the DC, do not know is not to make the rotating lights turn up with a magnet to.

2014年10月19日星期日

Set the system LED Blue beacon light

LED Blue beacon light by the solar battery component part (including support), LED lamp, a control box (within a controller and a storage battery) and pole of several components; solar panels light efficiency reached 127Wp/m2, high efficiency, is led blue beacon light  for the wind resistant design of the system; the lamp head points to 1W white LED and 1W yellow LED integration on the printed circuit board arranged in a certain distance as the lattice plane light source. Control box body with a stainless steel material, beautiful and durable; the control box arranged maintenance free lead-acid battery charge and discharge controller. This system use valve regulated lead-acid batteries, because of its little maintenance, so it is also called "maintenance free battery", is conducive to system maintenance cost is reduced; LED Blue beacon light charge and discharge controller both functions are available in the design (with light control, time control, over charging protection, over discharging protection and anti grounding protection etc.) and cost control, to achieve a very high price.

2014年10月8日星期三

Solar power beacon light principle of work

Solar power beacon light system working principle of simple principle, the use of daytime solar power beacon light  panels photovoltaic effect principle of receiving solar radiation and can output into electricity, solar power beacon light through the charging and discharging controller is stored in the accumulator, the beacon strobe light  when the illumination intensity gradually decreased to about 10lux, Changsha photosynthetic solar panels open voltage of about 4.5V, the charge and discharge controller detects the voltage value action, the lamp discharge of battery. Battery discharge after 8.5 hours, solar power beacon light charge and discharge Safety Warning Light  action, the battery discharge end. The main function is to protect the battery charge and discharge controller.

2014年9月27日星期六

Classification of rotating beacon light

Rotating beacon light emitting light colors can be divided into red, green (yellow, rotating beacon light  and subdivision standards and pure green, blue, orange and white), etc.. In addition, some LED lamp comprising two or three color chips. According to the rotating beacon light light with or without mixed scattering agent, rotating beacon light  or colorless, a variety of colors of LED can be divided into colored transparent, colorless transparent, colored and colorless scattering scattering four types. Colored scattering type LED is suitable for indicating lamp (such as traffic lights etc.). The rotating beacon light light emitting beacon strobe light  features round lamp, lamp, lamp, square, rectangular surface light-emitting tube, lateral tube, miniature tubes and other surface mount.

2014年9月22日星期一

Excuse me, high-speed road that red twinkle like LED Blue beacon light what role

Excuse me, I often cotton to the high-speed (including other high-speed) (see high-speed roadside green belt and the roadside have) that has a square plate inclined to what sky below it led blue beacon light  is a flashing red light like LED Blue beacon light that the lamp is stem what use, I saw it had a put it when the speed limit LED Blue beacon light to feel, to the deceleration (with great care, because rotating beacon light  do not know the way electronic eye installation where there, high-speed electronic eyes there are signs suggest).

2014年9月18日星期四

Rotating beacon light according to the structure classification of LED

Rotating beacon light according to the structure classification of LED
Rotating beacon light according to the LED structure is divided into a total of epoxy encapsulation, waterproof rotating beacon light  base epoxy package, ceramic base epoxy packaging and glass packaging structure. According to their budget to install solar street lamp price selection of different structure types.
According to the strength and the beacon strobe light  current of light have a common sub brightness of luminous intensity of LED, <10 MCD; high power LED, luminous intensity between 10 ~ 100 MCD; ultra high power LED, the luminous intensity of >100 mcd.
General rotating beacon light working current in 10 Ma to tens of Ma, and low operating current LED current in 2mA to (brightness and ordinary light-emitting pipe network).

In addition to the warning signal light  classification methods, and according to the chip material classification and classification by function method of rotating beacon light.

2014年9月14日星期日

Solar power beacon light introduction

1, the lamp panel length: 300mm 2, solar emergency, the electricity charge; solar cell: 50Wp; the life of 15 years 3, the battery life of 2 years: 12V/65AH; 4, LED life color: 100000 hours; red, solar power beacon light ,  green 5, visual distance: >800 M 6, continuous overcast and rainy days working time: 180H 7, flashing mode: automatic control; configuration of electric charging device main specification product characteristics: 1, solar power beacon light has reasonable design, beautiful and practical, light-emitting element using high-quality LED light source, the car beacon lights  effect is good, less power consumption, long life, anti aging. 2, solar power beacon light configuration of solar energy solar panel, using aluminum frame glass laminated light absorption, better, higher energy. 3, the load power is the lowest 10W, luminous surface is brighter, better pedestrian and vehicular visual effect. Built in 4, deep cycle of maintenance free batteries, use time is longer, the rainy 24 hours of continuous normal use effectively. 5, the shell adopts cold plate, plate integer coating, bottom sit with the user can push handle, four wheel beacon strobe light
 hand brake, the required intersection can be used directly in the user. 6, solar power beacon light to design the overcharge and over discharge protection circuit, current balance circuit stability, circuit board using environmental protection three proofing lacquer coating, better protection performance. 7, the high performance protection, grade is greater than IP53, the effective rain proof, dust intrusion.

2014年9月10日星期三

Application of Stars LED Blue beacon light introduction and installation method

In speaking of Stars LED Blue beacon light, I believe we already no longer unfamiliar, although it did not matter so much what we and our life, but actually has the very big relations, Stars LED Blue beacon light is mainly installed in the building, some of the light sent us some signal, application of aviation obstruction led blue beacon light  is mainly in order to ensure that a class of traffic lights at night the ship navigation safety and installed in some aids to navigation. Signals can give an indication of aviation, ships, a different Safety Beacon Warning Light  biggest effect is used for navigation and warning. Especially at night or under bad environment, whether ship or aircraft, problem, is easy to appear in the running time, Stars LED Blue beacon light will play an important role, the Stars LED Blue beacon light use the battery as the power supply. In fact, now demand, Stars LED Blue beacon light has been in continuous innovation of technology, the LED light source, has gradually replaced the incandescent light bulb, according to the relevant data shows: the power of aviation obstacle beacon warning light  is used in solar power, has low power consumption, long life, light color pure eye-catching.

2014年9月6日星期六

What is the solar power beacon light?

Solar power beacon light is the use of solar energy battery to supply power (silicon) this is a no maintenance and control of battery (completely sealed to LED lamp as the light source) as solar power beacon light  lamp is the advantage of no electricity, as a long-term investment can significantly reduce the capital, but also very convenient because solar power beacon light does not rely on the ordinary alternating current to the lighting, so also save a huge artificial, not in the LED strobe warning light  of underground line, maintenance line. But solar power beacon light is a self control does not need manpower. It is more convenient, more secure, use of renewable energy are also very friendly to the people now advocated way of life. Company specializing in the production of Warning Light  street lamp, solar energy lamp high pole lamp, street lamp, landscape lamp etc..

2014年9月2日星期二

This paper introduces the application of rotating beacon light

Rotating beacon light it is mainly used for road crossroads, narrow roads, road barriers, accident prone road junctions and other dangerous section of the road, through the rotating beacon light 12v  flash, to remind drivers attention, control speed. The working principle is to use the solar day solar energy into electrical energy stored in the chargeable battery, emitting LED converts electric energy into light energy, the solar yellow flashing lights flashing luminous, so as to guide the traffic function. The main characteristics of the rotating beacon light beautiful in appearance, the use of aluminum alloy material for the body, durable; the Yellow super bright LED light flashing, beacon light  can remind the drivers attention; the LED luminescent solar energy, no need of external AC power supply, especially suitable for remote power free dangerous section of the road; the specially designed flashing frequency selector switch flashing frequency, offer 4 choices; it is provided with a light control system, can choose full-time flashing or not flash, day and night flashing; solar cell had a large capacity and a rechargeable battery, can adopt energy-saving technology meets, lighting can vary with the sky brightness change, when it was bright light, when it's dark can automatically the energy saving condition, the lamp current is cut in half, the industrial warning light  off automatically, so as to satisfy any time road traffic indicates the need for, and the electrical energy is saved; when used in any weather, at any time to provide sufficient energy for LED lighting; Rotating beacon light is warning on highway, airport, parking, toll station area and construction site, has the advantages of convenient, simple installation, energy saving, less maintenance to carry.

2014年8月29日星期五

What are the LED Blue beacon light advantage

1 solar powered, no cable, whenever and wherever possible to provide clean energy for lighting. 2.led blue beacon light uses lithium iron phosphate battery, long term, energy, environmental protection, the use of more than 5 years led blue beacon light  maintenance. 3 super bright LED light source, red, yellow, blue, green and white light source selection, and supporting the 5 color lampshade. 4.led blue beacon light is an integrated circuit design, provides 12 kinds of advance flashing LED Traffic Batons is good, and can make flash mode switching from an infrared remote controller; and ensure fast charging automatically in the sunlight and cloudy weather. 5 poly carbon grease concave exit shell, durable, waterproof, dustproof, 360 degree viewing range up to 3 kilometers. 6 close automatically in the daytime, evening open automatically, led warning light  open, close.

2014年8月21日星期四

Application of rotating beacon light site

1: highway entrances and exits (ramp, fork). 2:rotating beacon light can also be located in the school gate, at the led blue beacon light  area, government agencies, the mall, many people and pedestrian road. 3: near the tunnel entrance. 4: toll solar power beacon light  near the entrance. 5:rotating beacon light near the crossroads, red lights.

2014年8月17日星期日

LED Blue beacon light products

The LED Blue beacon light is made of high quality resin. With high strength, able to adapt to harsh environment. The colors red, yellow, green and blue. Science parabolic reflector so that led beacon light  spread very far. Rubber gaskets, meet the level of protection, rain and dust, with a charging plug, it will be convenient to use in a variety of vehicles. Mainly used in motorcycle patrol, emergency vehicles, special vehicles and other places. LED Blue beacon light is widely used for police, public security, security warning all emergency situations of solar power beacon light  safety. The lampshade and lamp body, made of high quality resin, strong adaptation ability and light penetration. With strong impact resistance, unique aluminum casting fan cooling base, better heat dissipation. Equipped with permanent magnets and a cigarette lighter plug for the vehicle, easy to use. LED Blue beacon light the domes adopt high transparency, led blue beacon light  shock resistance, non fading; pulsed xenon lamp light source with high quality, high brightness; the use of whole sealing type design, accord with the level of protection, rain and dust.

2014年8月13日星期三

Solar power beacon light in driving role

When we are traveling, riding a bicycle to play everywhere, if on the way to the bathroom, or tire blew out solar power beacon light the situation, will let you have to stop. But this time if you are in the corners of parking is a very dangerous thing, very easy to cause traffic accidents. So this is facilitated by the led beacon light beacon light plays a key role. And not just the roadside warning role, when necessary can also as a lock to use. It is the same in the way the car, the car will often encounter all sorts of problems in the process of moving, to a stop, the driver needs to put the hazard warning signs in the vicinity of the vehicle, new obstacles to remind the traffic notice ahead, slow, safe driving. Visual range Traffic control baton lamp with good performance can increase the risk of solar power beacon light warning model, let the other driver group more clearly see this prompt. So as far as possible the use of good performance of solar power beacon light.

2014年8月10日星期日

Rotating beacon light in the field

Rotating beacon light, also known as solar construction warning lamp, lantern, roadblock warning lamp. Use place: 1, turn the road barrier; 2, at the crossroads and the road rotating beacon light  (vertebral on slowdown prompt); 3, foggy area (sea, Airport Road); 4, highway and no street road guardrail. 5, elevated and the tunnel entrance and exit guide wire position; 6, the vehicle the shunt (triangle lines surrounding); 7, the railway ramp; 8, Lane Toll station across the bar; 9, accident prone sections; 10, need to add a section of highway landscape led strobe beacon warning light .  The rotating beacon light battery life for more than 10 years, battery life is 3-5 years, replaceable.

2014年8月6日星期三

Common causes and treatment methods of LED Blue beacon light

LED Blue beacon light, the human eye can perceive the frequency is usually light flashing, above this frequency is not aware. Therefore, in lighting applications, if the pulse signal frequency is solar power beacon light than the low frequency components, the human will feel the flicker. Of course, in the specific application, there are many factors that may lead to a flashing light. For example, in off-line low power lighting applications, a common power supply topology is isolated flyback topology. To crown collar semiconductor with "solid state lighting standard energy star" 8 W away from the linear LED driver? Reference design as an example, the sine square strobe beacon light  regulator wave power conversion does not provide constant energy to primary bias, dynamic self supply circuit may activate and led flashes. To avoid this problem, we must make the primary bias in each half cycle of partial discharge, accordingly, need to choose appropriate constitute the capacitance and resistance of the bias circuit value. In addition, even in the use of excellent power factor correction, support the dimming of the LED Blue beacon light drive applications, also requires the electromagnetic interference filter. By step natural resonance transient current caused by the inductance and capacitance filter will stimulate the. If the resonant emergency beacon light  of input current to maintain the current lead, will be closed. After a short delay, usually also will conduct, the same resonant excitation. In the input waveform of 1.5 period, this series of events may be repeated many times, thus forming a visible flash. In order to deal with this problem, the input capacitor is a key requirement of dimming is the filter is very low, and the capacity to be able to pass and winding impedance decoupling. According to the formula, reduce the capacitance dimming module words, resistance can increase the resonance circuit, the principle to suppress oscillations, circuit recovery want.

2014年8月3日星期日

Stars LED Blue beacon light, rotating beacon light, solar power beacon light

Solar power beacon light in the choice of introduction In the design of solar lighting lamp, relates to a light source, solar cell system, battery charge and discharge control and many other factors, including any link problems will cause the product defect. solar barricade lights nergy lamp is composed of five parts: solar panel, controller, storage battery charging and discharging, the load and the lamp shell. 1 solar cell For polycrystalline silicon solar cell production process is relatively simple, low prices than single crystal, conversion efficiency increased. More in rainy days, the sun is not very abundant in southern area, using rotating beacon light 12v  crystal silicon solar cell as well, because of monocrystalline silicon solar battery performance relatively stable. The amorphous silicon solar cell in the indoor sunlight is weak situation is better, because the amorphous silicon solar cells to solar illumination conditions require relatively low. First of all, any one of solar power beacon light products, we must first understand the solar battery, solar battery has five major electrical parameters, namely: the short-circuit current, open circuit voltage, peak current, peak voltage, peak power. For the general customers, how can we know its 5 parameter values? For the general customers, how can we know its 5 parameter values? Teach you a simple method, let us know that the relative parameters, we can at 12 noon sunlight conditions with universal testing the 5 parameter meter (of course that the measured values can be a bit error). For a single solar cell, it is a PN junction, except when the sunlight above, it can generate electricity, it also has all the characteristics of solar power beacon light. In the standard light conditions, the nominal output voltage of it. Solar cell components in the solar lighting use are composed of a plurality of solar battery connection. Solar cell components in the solar power beacon light  use are composed of a plurality of solar battery connection. The user can read to understand the stability of prices of solar cells, solar lamps lighting performance and. Below I will introduce the charge discharge controller, load, battery etc.. The 2 charge and discharge controller Regardless of the size of solar lamps, a good performance of the charging and discharging control circuit is essential. Regardless of the size of solar lamps, a good performance of the charging and discharging control circuit is essential. In order to prolong the service life of the battery, charge and discharge conditions on it must be limited, to prevent the battery from overcharge and deep discharge. In addition, since the input energy of solar photovoltaic power generation system is very unstable, control of photovoltaic power generation system for battery charging control than ordinary battery charging to more complex. For the design of solar lamps, success and failure is often depends upon the success and failure in the charging and discharging control circuit. Without a good performance of the charging and discharging control circuit, can not have a good performance of the solar lamp. Charge discharge controller must have the following characteristics, namely: anti charging control, prevent charging control, prevent over discharge control, temperature compensation. 3 battery Since the input energy solar power beacon light of photovoltaic power led blue beacon light  system is very unstable, so the general need to configure the battery system to work, solar lighting is no exception, you must configure the battery can work. General lead-acid battery, Ni-Cd battery, Ni-H battery, their capacity will directly influence the reliability of the system and the system of price. Battery capacity choice to follow the following principles: first, in can meet the night lighting under the premise of the daytime solar cell components, energy storage down as far as possible, but also can store meet continuous overcast and rainy day night lighting need electricity. Battery capacity is too small can not meet the need of the night lighting. Storage capacity is too large, the battery is always in the state power loss, affect the life of the battery, at the same time wasted.

2014年7月31日星期四

Technology research on solar power beacon light introduction

Solar power beacon light include: solar street lamp, solar electric complementary street lamp, solar and wind energy complementary road lamp, solar power system, solar street lamp solar power beacon light  system from a variety of network and other new energy and energy-saving series solution 1, the world's highest efficiency solar cell module; efficiency as high as 20%. Controller 2, independent research and development, waterproof rotating beacon light  and stable quality assurance. 3, solar power beacon light can be minus 40 degrees Celsius and 60 degrees Celsius environment, still can work effectively. 3, solar power beacon light can be minus 40 degrees Celsius and 60 degrees Celsius environment, still can work effectively. 4, according to customer's need to provide a variety of storage options: maintenance free lead-acid battery, nano colloid battery, beacon strobe light  iron phosphate battery. 5, the LED light source, high efficiency and energy saving, long service life of light source. 6, suitable for highway, city roads, secondary roads, street, courtyard area lighting.

2014年7月25日星期五

The main products rotating beacon light features

1, the rotating beacon light has reasonable design, beautiful and practical, light-emitting Safety Beacon Warning Light  using high-quality LED light source, scintillation effect is good, less electric consumption, long life, anti aging. 2, the rotating beacon light configuration of led blue beacon light  energy solar panel, aluminum frame glass laminated, translucent better absorption, higher energy. 3, the load power is the lowest 10W, luminous surface is brighter, better visual effect of pedestrians and vehicles. 4, with deep cycle maintenance free batteries, use time is longer, and 24 hours of continuous normal use. 5, shell using cold plate, plate making solar power beacon light  spray, bottom sit with the user can push handle, four wheel fixed hand brake, the junction can be used directly in the user. 6, design the overcharge and over discharge protection circuit, current balance circuit stability, circuit board using environmental protection paint, better protection performance. 7, the high performance protection, grade is greater than IP53, the effective rain proof, dust intrusion. 8, rotating beacon light conforms to the national standard and national public safety industry standard GB/T743 - 2007 technical standards. 9, do not qualified products, quality is guaranteed, and can design different power and rotating beacon light power devices of different styles according to customer requirements.

2014年7月23日星期三

Introduced the principle of solar power beacon light

Solar power beacon light lamp is a use of solar energy for street lamp, because it is not affected by power supply, not led blue beacon light  embedding, not consumption of conventional energy, as long as the sun can be installed locally, so people pay more and more attention, because of its no pollution to the environment, which is called the green environmental protection products. Solar power beacon light can be used for urban park, road lighting, lawn, and can be used for the distribution of multi-function traffic baton  density is low, traffic inconvenience, lack of conventional fuel economy is not developed, it is difficult to use conventional energy generation, but the solar energy resource rich areas, to domestic lighting problem solving of the people of these regions. In recent years, with the rapid development of solar photovoltaic industry, photovoltaic application field is gradually expanding, a variety of new photovoltaic products continue to emerge. In street lighting, solar lighting system as the combination of technology and art - solar street lamp, has been widely used in many traffic signal baton  of developed countries America, France, Japan, in our country is in the starting stage. At present the domestic solar power beacon light is the problem of small power (light intensity equivalent to 100W incandescent lamp), in the face of continuous rain, can only work for 5 days, and in the use of large area, time the start up to more than 10 minutes, which seriously affected the promotion and application of sunlight lamp. In order to solve the above problems, the company developed a "big power with independent intellectual property rights of the Yijia photovoltaic solar photoelectric intelligent lamp".

2014年7月20日星期日

Simple description of the solar power beacon light

Solar power beacon light, comprising a mounting frame, solar panels, solar battery box, LED lamp, which is characterized in that: the solar battery box installed on the mounting frame, wherein the led blue beacon light  is installed in the solar battery box through the screw on the lid of the box, the box cover and the solar battery box through the lock to fix, and both sides of the solar power beacon light battery box are respectively provided with a solar panel mounting ears, and solar battery box in the middle position of the bottom is provided with a fixed pin; connected to the solar panels end back through the installation of ear sliding pin shaft and the solar battery box side, the two sides of the back of the solar the other end of the fixed plate is provided with arc-shaped slide rail, the rotating beacon light 12v  panels on the two sides of the back arc before and after the slide rail and solar battery box at the bottom of the sliding pin sliding connection, and through the arc-shaped slide rail can be arbitrary adjustment range of solar panels in the 90 ° LED; at the top of the lamp is provided with a root to prevent birds stay in. The needle angle. The utility model has the advantages of compact structure, energy saving, the sun no matter what angle can be very good to the Pharos real-time power supply.
1 solar power beacon light, comprising a mounting frame, solar panels, solar battery box, Stars LED Blue beacon light, which is characterized in that: the solar battery box installed on the mounting frame, wherein the LED lamp is installed in the Strobe warning light  box through the screw on the lid of the box, the box cover and the solar battery box through the lock to fix, on both sides of the solar battery box are respectively provided with a solar panel mounting ears, and solar battery box in the middle position of the bottom is provided with a fixed pin.
According to claim 2 I the solar power beacon light, which is characterized in that: one end connected to the solar panels by mounting ears back sliding pin shaft and the solar battery box side, back and both sides of the solar panels on the other end of the fixed with an arc-shaped slide rail, the solar power beacon light plate on the back sides of the before and after solar power beacon light arc slide rail and the battery box at the bottom of the sliding pin sliding connection, and through the arc-shaped slide rail can be arbitrary adjustment range of solar panels within 90 deg..
According to claim 3 I said a solar lamp, which is characterized in that: the top LED the lamp is provided with a root to prevent birds stay in the needle angle.

2014年7月16日星期三

Describe the characteristics of solar power beacon light

1 a solar power beacon light, comprising a mounting frame, solar panels, solar battery box, LED lamp, which is characterized in that: the solar battery box installed on the mounting frame, wherein the led beacon light lamp is installed in the solar battery box through the screw on the lid of the box, the box cover and the solar battery box through the lock to fix, on both sides of the solar battery box are solar power beacon light  provided with a solar panel mounting ears, and solar battery box in the middle position of the bottom is provided with a fixed pin.
According to claim 2 of the I solar power a beacon light, which is characterized in that: one end connected to the solar panels by mounting ears back sliding pin shaft and the solar battery box side, back and both sides of the solar panels on the other end of the arc-shaped led rotating beacon light  is fixed, the solar panels on the sides and back the arc slide rail and the solar battery box at the bottom of the sliding pin sliding connection, and through the arc-shaped slide rail can be arbitrary adjustment range of solar panels within 90 deg..
According to claim 3 of the I solar power a beacon light, which is characterized in that: the top LED the lamp is provided with a root to prevent birds stay in the needle angle.

2014年7月12日星期六

LED Blue beacon light technology and its characteristics

LED Blue beacon light , called as the name implies, refers to the lamp products using LED (Light-emitting Diode, light emitting diode) technology as the main
White LED lighting
The white light LED lighting (16)
To be luminous source. led warning lamp  is a solid semiconductor components, the use of current clockwise circulation to the semiconductor p-n junction coupling, again by the semiconductor separation of negatively charged electrons and positively charged hole two carrier combined with each other, and produced photon emission, different types of LED can be emitted from the infrared to blue, and between violet to UV between different wavelengths of light. The new development in recent years is in the blue light LED is coated with fluorescent powder, the blue LED into a white LED products. This operation generally need to match driver circuit (LED Driver) or power supply (Power Supply), the main function of drive circuit or power supply is the AC voltage into a DC power supply, and at the same time to complete compliance with led blue beacon light  voltage and current, component to drive the matching.
The bulb volume LED Blue beacon light small, light weight, and with epoxy resin package, can withstand high strength mechanical shock and vibration, not easy to be broken, and the brightness attenuation cycle is long, so the service life can be as long as 50000-100000 hours, more than 1000 hours and fluorescent light tube of conventional tungsten light bulbs of 10000 hours. The LED lamp life of up to 5 ~10 years, so not only can reduce lamp replacement costs, but also because of its minimal current can be driven light-emitting characteristics, in the same illumination circumstances, power consumption is only 1/2 of the advantages of a fluorescent lamp, so led rotating beacon light  also has energy saving and energy saving. But as part of LED technology is not enough, so initially used in the luminaire shortcomings include the light quality (color, consistency, temperature), heat is not easy, the poor and the price is high, and the improper cooling, will cause the brightness and the circuit of LED lamp component service life accelerated decay. Manufacturing technology make a spurt of progress, the above shortcomings, including the thermal resistance of LED decreased gradually, the light quality also in ascension. In 2008, in addition to the luminous efficiency LED Bai Lengguang had reached 100 Lm/W, while the LED warm white luminous efficiency, is expected in 2010, also from 70 Lm/W up to 100 Lm/W. Compared with other common light source, tungsten lamp, fluorescent lamp is about 15 Lm/W about 45~60 Lm/W, HID lamp is about 120~150 Lm/W, the luminous efficiency of LED apparently has gradually with the advantage; the following is the comparison of LED and other common lamp lamp:

2014年7月10日星期四

Solar power beacon light overview


Solar power beacon light  uses solar energy during the day and night, charging, need not complex pipeline laying, adjustable lighting layout, safety, energy saving and no pollution, no manual operation is stable and reliable, saving electricity and maintenance free.
The 1 system.
The system comprises a solar battery component part (including support), LED lamp, a control box (with controller, battery pole) and several parts; Beijing Tianzhu sunshine solar panels light efficiency reached 127Wp/m2, high efficiency, very beneficial to the wind solar beacon lights  design system; the cap portion to 1W-5W white LED and 1W-5W yellow LED integrated in a printed circuit board arranged for a certain distance matrix as a plane light source.
Control box with a stainless steel material, beautiful and durable; the control box placed maintenance free lead-acid battery charge and discharge controller. This system use valve regulated lead-acid batteries, because of its little maintenance, so it is also called "maintenance free battery", is conducive to system maintenance cost is reduced; the charge and discharge controller has functions in the design (with light control, time control, over charging protection, over discharging protection and reverse connection protection etc.) and cost control, to achieve a very high price.
The 2 Principle
The working principle of the system is simple, the use of solar day panels photovoltaic effect principle of solar radiation received energy into electrical energy output, after charge discharge controller is stored in batteries, the night when the led blue beacon light intensity gradually decreased to about 10lux, Changsha photosynthetic solar panels open circuit voltage is about 4.5V, the charging and discharging controller to detect the voltage value action, the battery of the lamp discharge. Battery discharge after 8.5 hours, the charge and discharge controller action, the battery discharge end. The main function is to protect the battery charge and discharge controller.

2014年7月8日星期二

Star LED blue light with matter

Many people heard after the battery powered beacon lights   Blu ray injuries all doubt and anxiety, experts said, LED lights with no problem in the outdoors and large sites, but the family should be used with caution, especially the three kinds of people need to be careful.

Although the led blue beacon light  ray injury problems, the industry and experts are not completely consistent. But there is no controversy one point, that is LED light, belonging to the rich blue. Member, international optical radiation safety standardization committee professor Mou Tongsheng reminded, there are three types of people should be used with caution, first class, all want to get, is a delicate children eyes. The other two kinds of people, generally know very little:

Diabetes after ten years of development, has the retinal lesions, retinal light damage under about value decreased significantly, and drugs, we live in a lot of drugs are photosensitive, after we have eaten medicine, light damage may be more obvious.

Reporters learned that medical experts, photosensitive drugs are not under twenty, including doxycycline, ciprofloxacin, oral hypoglycemic agents are commonly used in D-860. Patients taking these drugs, not only with the lamp to be careful, the sun also need to be careful.

In the discussion, and a term was frequently mentioned, that is "color temperature":

LED energy-saving, but do not do very high color temperature. (indoor, color temperature to drop down. )

The so-called color temperature, color of light source is a measure of the scale, warm light of low color temperature is what we usually say more components, red, blue is less. On the other hand, cool shade of blue, the color temperature is high. Our common light source, the temperature is about 2000K, incandescent lamps are 3000K, the morning sun at noon about 4400K, up to 5600K. Senior engineer, Shanghai Lighting Association chairman Yu Anqi said, people with different times of the day, conform to the laws of nature is the most ideal, but now on the market of the LED lamp, the color temperature is higher, the interference to the human body biological clock:

When the household lamp is mostly in the evening, low color temperature of light, the measurement of 27 product color, there are seven samples is much higher than that of 6500K, and even more than 100000 K, has exceeded the upper limit of white color temperature lighting products, long-term use, will affect sleep, as a biological clock, thereby reducing the people immunity.

This point, consumers know too little! A reporter through a dozen lamps, outer packing are not Biao Mingguang as the color temperature. There are two only in the manual. Expert appeal, countries should set, lighting products on the packaging to make color much scale. Professor China chairman car beacon lights   Forum Zhang Haicong said, consumers should avoid a mistake, is light to shine better more. The best LED lamp with lampshade, on the one hand, the light can be more soft, on the other hand, inspection certificate, such doing can put the blue spill is reduced by 1 to 2 orders of magnitude:

In order to improve the light efficiency, many manufacturers use unscrupulous divisive tactics, the most obvious is the lamp, a lot is a bare, the person is uncomfortable. Table below are cover, put into a sting eye does not sting the eyes.

2014年7月5日星期六

Solar energy lamp product main features

Technical parameters:
The 1 solar cells 8W
2 battery power 12V/7AH,
3 LED pixel tube, the life of 10 years
4 visual distance 2km
5 flashes: left, led blue beacon light  orientation guide
The 6 panel size: 120cm*40cm (other sizes can be customized)
Design Description: high brightness, high penetration, effective protection of road safety, is mainly applicable to the road special and overhaul construction.
7 work time: a full battery, continuous overcast and rainy days can be applied continuously for 5 days and nights.
The solar panels light effect, the light fades the output voltage is reduced to a certain value, led beacon light  automatically open. The light gradually bright output voltage increases to a certain value, warning lights automatically turn off. The sealing combination lamp group, imported super bright LED. Polycarbonate shade impact resistance, aging resistance, high transparency. Nanning Tongtai traffic facility specializing in the production of solar lights, solar signs.

2014年7月2日星期三

Network alarm rotating beacon light

     Safety warning lights, warning of the need to hang in place to stop the rotation through the power, also issued a flashing red, yellow, suitable for the site, the entrance and other local businesses, led rotating beacon light  shops selling alarm can also be played on the door prompt action. Applicable security products shop, reminder alerts with construction sites.
Safety warning lights, warning of the need to hang in place to stop the rotation through the power, also issued a flashing red, yellow, suitable for the site, the entrance and other local businesses, shops selling alarm can also be played on the door prompt action.
Features:
Hanging in the place rotating beacon light 12v  needs an alert, through the power kept turning, also issued flashing red, yellow, suitable for construction sites, corporate door and other places, shops selling alarm can also play a prompt action on the door.

2014年6月20日星期五

installation of solar power beacon light of common sense

  solar power beacon light of rational distribution: 
     1 Be sure to clearly mark the highest point and the edge of the obstacle set up led blue beacon light  the middle layer spacing must be no greater than 45 meters, meters above the city, especially ultra-high buildings to consider additional intermediate layer barrier. 
     2 For <150-meter high-voltage transmission cables, towers can be located at the top of the solar power beacon light intensity obstacle lights. 
     3. Obstruction light installation location should not be greater than 45 meters, the chimney or other similar nature, buildings, top obstacle lights shall be located between the top of 1.5-3 meters, taking into account the pollution of the lamp chimney, obstacle lights can be set in 4-6 meters below the position at the mouth of the chimney. 
     4 150 meters above the object should be in the ultra high-intensity obstacle lights used in conjunction.

2014年6月13日星期五

Installation of solar power beacon light building standards

 1. The top of the high-rise buildings must be located one or several aviation obstruction led rotating beacon light to aid navigation safety. 
 2 buildings higher than 45 meters above the ground surrounding the middle layer must be additional obstacle lights, low, the distance between the light intensity obstacle lights must be no more than 45 meters. 
 3 buildings higher than 150 meters high, and then the top must be set high intensity aviation beacon lights for trucks and you want to use in a combination of light intensity obstacle lights to show its existence.

2014年6月6日星期五

led blue beacon light product parameters


1, solar panels: 18V/10 monocrystalline life ≧ 20 years,
2, Battery: maintenance-free lead-acid battery 12V/7AH life> 3 years,
3, LED: led rotating beacon light Super bright yellow, red, or red and blue LED, visible distance> 1000 m,
4, the controller: programmable control, light control, can control all day flashing, flashing at night,
5, solar power beacon light flicker frequency: 60 times / min can be customized upon request,
6, Working hours: full sun to charge 8 hours to work 72 hours,
7, the working environment at -20 --- +65 degrees Celsius can work, continuous rainy weather work> 200 hours,
8 Protection class: Ip65,
9, Weight: 7.6KG,
10, base diameter: diameter 80MM,
11, product size: 520 * 170 * 250MM,
12, Package Size: Neutral carton 60 * 35 * 58CM.

2014年6月2日星期一

Note that the manner and method used to install solar power beacon light


1 installed in the middle of the road with the road, rotating beacon light pay attention when installing solar panels whether exposure to the sun
2 installation methods are adopted column installation, mounting screws
3 In addition car beacon lights careful when installing solar panels mounting angle is 30 degrees -35 degrees angle, and to the south.

2014年5月26日星期一

rotating beacon light of Products


Product Name: rechargeable handheld stop sign;
Dimensions: 320 * 160mm;
Charging voltage: AC 220V 50HZ;
Charging time: 8 to 10 hours of continuous charging;
Work: red LED strobe,rotating beacon light direct flash, (at the top with a flashlight function);
Discharge time: 6 hours continuous discharge lamp lighting (battery fully charged);
Handheld warning stop sign is shaped using a directional beacon lights for trucks light technology, the beam has a strong penetrating properties, is the best tool for traffic warning rainy, fog, snow, dust and other harsh weather and more law area applications.

2014年5月23日星期五

solar power beacon light Features

1, the site is easy to move, high and low can lift.

2, solar power beacon light strobe, life 50 million times.
3, voice prompts (high risk do not close).
4, retractable safety belts, length 25m.

2014年5月15日星期四

Stars Beacon Warning Light Features and Benefits



A solar-powered, no cables, providing clean energy lighting anywhere.
(2) Safety Beacon Warning Light using lithium iron phosphate batteries, long-lasting, energy, environmental protection, the use of more than 5 years maintenance free.
3 super bright LED light, red, yellow, blue, green and white light sources to choose from, and supporting the five-color shade.
4 integrated management design, available in 12 pre-programmed flashing mode, and flicker via infrared remote control mode switch; and ensure that in daylight and cloudy weather automatic rapid charging.
5 polycarbonate resin concave border shell, durable, waterproof, dustproof, 360-degree viewing range of up to 3 kilometers.
solar barricade lights automatically shut down during the day, automatically turns on at night can also manually open and close.
7 sizes:. 130 * 130 * 135mm Weight: 850g.


2014年5月5日星期一

Stars solar driveway lights, solar yellow flashing red lights slowly


Stars solar driveway lights product description:
Yellow successful screen with a red "slow" character alternately flashing signals to alert passing vehicles, pedestrians slow down, pay attention to Strobe warning light safety, the proposed system is equipped with a solar-powered, energy saving and environmental protection, the installation does not require the laying of cables.
Product Features:
Imported LED wick, Beacon light beautiful appearance, high brightness, long life, the indicators meet the national standard GB14887-2011 "Road traffic lights" standard.

2014年4月8日星期二

Installation Stars Safety Warning Light logo lights

Prepare vehicle Safety Warning Light installed before the start of the following tools : .. 1 flathead screwdriver, Phillips screwdriver, 2 , 3 insulating tape , 4 towels, 5 pliers.
1 marked the first shop beside the trunk of a car towel , with a flathead screwdriver pry logo, shop towel to prevent scratching the body 2 . Attention first double-sided adhesive peel the body , when the prying force is moderate, not too fierce , little by little , slowly pry down , cleaning the car standard and the car body sided adhesive 3 with a Phillips screwdriver to remove the interior rear bulkhead , note that some places have clips, be careful operating noise removed board can see various lines . 4 now come standard installation of car lights, car standard lamp power line through one of the car standard positioning holes , wear to tear inside the trunk of the car beacon -sided adhesive on the back , while the cable side of the car beacon light stick to the car body , the pressure tight. 5 car Safety Beacon Warning Light installed, then the power now . Vehicle beacon light to pick license after power lights , so when you turn the car standard lamp night light will also open , to find the license plate lamp power connector 6 . Unplug the plug, a hole in the positive and negative of each strip , exposing the wire core , according to red to red , black to black -wired , do not forget to wrap with insulating tape and, finally, re- plug back ! Replace the tail cover insulation board !

2014年3月26日星期三

Stars Safety Warning Light Strobe Warning Light Precautions

1 can be controlled by turning the knob strobe speed, clockwise from high to low strobe strobe lit up.
2 When the red charge indicator light on the charger, rechargeable battery charger indicator lights green after completion. Timely charge, which can be charged when the lights dim. Completely stop the use of time should not exceed two months.
3 To extend battery life per charge, the battery should be continuously filled, should try to avoid each discharge energy runs out. If power is exhausted, should be promptly charged within 72 hours in order to avoid damage or shorten Stars Safety Warning Light battery life.
4 Stars Safety Warning Light shall not be placed in the vicinity of the fire source and heat use. Use of the environment in a very flammable gas or acid, while alkali gases, please use caution.

2014年3月23日星期日

Stars Safety Warning Light Features and Benefits

A solar-powered, no cables, providing clean energy lighting anywhere.
(2) using lithium iron phosphate batteries, long-lasting, energy, environmental protection, the use of more than 5 years maintenance free.
3 super bright LED light, red, yellow, blue, green and white light sources to choose from, and supporting the five-color shade.
4 Stars Safety Warning Light integrated management design, available in 12 pre-programmed flashing mode, and flicker via infrared remote control mode switch; and ensure that in daylight and cloudy weather automatic rapid charging.
5 polycarbonate resin concave border shell, durable, waterproof, dustproof, 360-degree viewing range of up to 3 kilometers.
6 automatically shut down during the day, automatically turns on at night can also manually open and close.
7 Dimensions 130 * 130 * 135mm Weight 850g.

2014年3月19日星期三

Stars Safety Warning Light Lightbar How to Install

   Long row of warning lights installed in the vehicle without the punch, will not damage the body. Can be fixed with a retractor, retractors while the fixed side of the door edge fixed lamp body. Alarm transmission is usually mounted in front of the location in the ashtray, and the other in the seat around the transmission surface of the plastic plate.
Specific installation methods:
The first step: first Stars Safety Warning Lightinto the roof, the tripod screw hole locations can be aligned with the car door post,
Step two: After comparing retractors pitch, and then fixed hooks on the screws.
The third step: the retractor and distribution of screws, the long lights fixed tight. (Hand pushed a little bounce light can not stand)
Step Four: The long lamp power cord loose, according to the following figure laying.
Step Five: After the completion of the laying of the line, then the power of positive and negative.

2014年3月15日星期六

Note that the nominal voltage and function of each model.

Note that the nominal voltage and function of each model.
Prevent debris blocking the top of the Safety Beacon Warning Light, so light control failure.
Do not use outdoor warning lights mounted upside down to avoid water.
Replace the fuse plug the solar power beacon light off before replacement.
Screw installation, powerful magnet installation.

2014年3月11日星期二

Safety warning lights should never buy

Safety warning lights, usually applied to road construction , machinery and equipment, construction vehicles , ambulances , police cars, an alert security guard post and all need a place to remind mainly played the role of a danger identification , and some tips in front of a police point . Color into red, yellow , blue, green , red, yellow and blue colors are generally the most used , the face of many brands, specifications and diverse warning light , how should we choose the fixtures it?
1 machinery and equipment generally choose circular warning light , working voltage is 12v, 24v, or 220v. If it is connected to electricity directly from the machinery and equipment , then it is based on voltage of the device to select the lamp voltage , 24v and 220v with general get more . If the device is a highly dangerous machine tools, electrical equipment , etc. , should also choose with sound , the staff will give greater vigilance to avoid accidents. Booth, security booths , security booths , alarm and other occasions generally choose a square , it is recommended to select led light emitting diode , which is also known as led Strobe lights , visibility is very high, visible distance up to 1000 meters in general more generally as a pair of red and blue alternately flashing , the public can clearly be seen in front of MCC security patrol point or alarm point , when there is an accident and more convenient for help.
2 there is a relatively wide range of uses , is applied to the roof , mainly used in construction vehicles, police cars, rescue vehicles , ambulances and other special vehicles. Buy this Safety Warning Light is generally more attention to the transport sector with relevant regulations, not just an option , generally choose whole yellow construction vehicles , ambulances select all blue , only police cars to choose red and blue color , so Please when choosing this type of vehicle warning lights must pay attention to . If installed correctly, will be fined , and suggested modifications such warning lights should generally first local police department for filing procedures.

2014年3月9日星期日

Which allows the use of the vehicle warning lights?

Warning light fixtures are signs that not all vehicles are eligible for installation. "Road Traffic Safety Law" Article XV "police cars, fire engines, ambulances and engineering rescue vehicles shall be in accordance with the provisions of spray logo design, install alarms and identification lamps. Other vehicles shall not be painted, installation, special use of the vehicle or its similar logo design, alarms or identification lamps. before being installed after the "relevant state departments have specifications of the four special vehicles with lights required to apply traffic management department to obtain approval, Banqi procedures to obtain relevant documents generally prohibit the installation of civilian vehicles. In recent years, many private vehicle owners out of curiosity, the installation of warning lights, sirens and other private installation, are violations. I hope to be helpful, if it is illegal to install Solar Warning Light, I suggest timely rectification, lest punishment relevant departments.

2014年3月7日星期五

Solar Warning Light

Using high-quality rare earth trichromatic lamp, high temperature electronic ballasts, and mercury and many other high-temperature solid technology, research and development of high-power floodlight spiral energy saving lamps, high power energy-saving lamps successfully resolved there has been a power and light effects contradiction between life. With high efficiency, high illumination, long life, low power consumption, good color rendering, energy-saving, energy-saving, easy to replace features, for supermarkets, restaurants, hotels, shopping malls, factories, workshops, industrial lighting and municipal street lighting, traffic , marine, aviation and other places.
We produce various models of Solar Warning Light, solar lights, solar lawn lights, solar garden lights, solar lights, solar lawn lights, photovoltaic systems, wind and solar systems, LED lights, solar lights, solar power systems, solar flashlights, flashlights, High-power flashlight, LED flashlight, quality, quality, appearance, there is a very good lighting effects.

2014年3月2日星期日

Warning lights Product Features

1, Safety Warning Light using cold light source design environmentally friendly, not hot, high photoelectric conversion efficiency, strong direction.
2, long life; effective life of more than 100,000 hours.
3, low power, small power consumption and reasonable light distribution curve, effectively improve efficiency.
4, warning lamps have good dustproof, waterproof performance.
Warning Light Usage: Widely used in public security, military, transportation, machinery and equipment, entertainment and many other areas.

2014年2月27日星期四

How to install warning lights

1, to install this Beacon Warning Light car faithful reminder: warning light is divided into positive and negative, positive connection port 58, the negative pole screws, otherwise it will not blink
2, when opening T73-A must be careful, because the space is small.
3, the normal wiring methods, wiring, a termination screws, one end of the broken wire to 58 ports, broken lines cross wiring again before flashing normally.

2014年2月26日星期三

Features and advantages of LED warning lights

Luminous Options include: Always, shiny, strobe, steady / flashing mixed;
Installed base has: L bar, straight bar, folding, drum;
Compared to traditional light sources for Safety Beacon Warning Light it produces less light and longer life than conventional bulbs;
1 watt power LED bulb can replace eight watts, where the use of the process is more energy efficient.

2014年2月25日星期二

Traffic marking

Road traffic signs "Traffic markings." Middle of the road long yellow or white line, called "lane centerline." It is used to separate from the vehicle, so that they interfere with each other. White dotted line on both sides of the center line, called "lane dividing line", which provides vehicle traveling in the vehicle lane. Non-motor vehicle lane in the non-driving. At the intersection surrounded by a white line is the "stop line." When the red light, all kinds of vehicles should be parked in this line. Equality with the white line on the road like a zebra promenade that lines the composition is the "crosswalk." Pedestrians crossing the road safer here.