installation of solar power beacon light of common sense

  solar power beacon light of rational distribution: 

     1 Be sure to clearly mark the highest point and the edge of the obstacle set up led blue beacon light  the middle layer spacing must be no greater than 45 meters, meters above the city, especially ultra-high buildings to consider additional intermediate layer barrier. 

     2 For <150-meter high-voltage transmission cables, towers can be located at the top of the solar power beacon light intensity obstacle lights. 

     3. Obstruction light installation location should not be greater than 45 meters, the chimney or other similar nature, buildings, top obstacle lights shall be located between the top of 1.5-3 meters, taking into account the pollution of the lamp chimney, obstacle lights can be set in 4-6 meters below the position at the mouth of the chimney. 

     4 150 meters above the object should be in the ultra high-intensity obstacle lights used in conjunction.

Installation of solar power beacon light building standards

 1. The top of the high-rise buildings must be located one or several aviation obstruction led rotating beacon light to aid navigation safety. 

 2 buildings higher than 45 meters above the ground surrounding the middle layer must be additional obstacle lights, low, the distance between the light intensity obstacle lights must be no more than 45 meters. 

 3 buildings higher than 150 meters high, and then the top must be set high intensity aviation beacon lights for trucks and you want to use in a combination of light intensity obstacle lights to show its existence.

led blue beacon light product parameters

1, solar panels: 18V/10 monocrystalline life ≧ 20 years,
2, Battery: maintenance-free lead-acid battery 12V/7AH life> 3 years,
3, LED: led rotating beacon light Super bright yellow, red, or red and blue LED, visible distance> 1000 m,
4, the controller: programmable control, light control, can control all day flashing, flashing at night,
5, solar power beacon light flicker frequency: 60 times / min can be customized upon request,
6, Working hours: full sun to charge 8 hours to work 72 hours,
7, the working environment at -20 --- +65 degrees Celsius can work, continuous rainy weather work> 200 hours,
8 Protection class: Ip65,
9, Weight: 7.6KG,
10, base diameter: diameter 80MM,
11, product size: 520 * 170 * 250MM,
12, Package Size: Neutral carton 60 * 35 * 58CM.

Note that the manner and method used to install solar power beacon light

1 installed in the middle of the road with the road, rotating beacon light pay attention when installing solar panels whether exposure to the sun
2 installation methods are adopted column installation, mounting screws
3 In addition car beacon lights careful when installing solar panels mounting angle is 30 degrees -35 degrees angle, and to the south.