Stars led blue beacon light The following details of solar barricade lights

Solar barricade lights standard:

The top 1 high-rise buildings must be located in warning signal light‍ one or several solar barricade lights, the navigational safety.

2 buildings higher than 45 meters above the surrounding ground must be in the middle layer of additional obstacle lights, with low intensity, between the obstacle lamp distance must be less than 45 meters.

More than 3 high buildings 150 meters,Solar warning light‍  then the top must be set high intensity of solar barricade lights, and in the light barrier lamp used in combination to show its existence.

solar power beacon light General traffic barricade light introduction and use

Traffic barricade light! And the ordinary lamps are not the same, the material is power supply system by imports efficient battery plate, maintenance free accumulator, Solar Warning Light‍ running through the low power consumption control circuit, charge during the day, night shining, ensure the safety of maritime, air navigation, guidance, and ensure the battery can work in normal state, obstacle lamp used for a long time normally, can work in harsh environments.

Traffic barricade light is a kind of red safe light or flashing, is mainly used to obstacle guiding potentially hazardous to aviation, no external power supply, a high-efficiency silicon panels, specially configured for high efficiency and low temperature maintenance free battery power supply system, and can ensure Safety Warning Light‍ the continuous rainy days to normal work 20 days.

Method of use:

1 in the long time preservation, staff need to obstacle lights placed in dry place, from time to time, required maintenance time.

2 before the installation and use, will switch to the on position.

3 if traffic barricade light lamp does not light or light is weak, the solar aviation obstacle lamp exposure in the sun can shine 4 hours.

Summarizes the methods and properties of the above traffic barricade light, to make up the difference with the ordinary lamp, lantern is not long on but ablaze, the other is mounted on the highest point of the building and the edge, no matter what kind of obstacle lamp types, staff need to use at the installation warning signal light‍ when considering obstacle lights at the same time and sequence flicker, in order to achieve obvious warning effect.

rotating beacon light The reasonable layout of LED barricade lights

1.led barricade lights must clear out the highest point of the obstacles and the edge set obstacle lights, middle layer spacing must be less than 45 meters, the city Zhongbai meters rechargeable traffic baton‍ high buildings especially considering the intermediate layer and barrier.

Intensity of 2 <150 m tall obstacles for high-voltage transmission cable, tower can be white at the top of the marker lamp.

Installation location should not be 3.led barricade lights more than 45 meters, the chimney or other similar nature of the building, the top obstacle lights should be located in the top 1.5-3 meters between, considering the chimney to light pollution, obstacle lights position can be located below the chimney mouth 4-6 meters.

4.led barricade lights should be higher than the extra industrial warning light‍ object 150 meters shall, in high intensity obstacle lights with the use of.

What is the role of Traffic warning light

For the full protection of police in the field of personal safety, embodies the concept of people-oriented love convoy police law enforcement, Zhaoqing City Public Security Bureau led blue beacon light‍ police detachment of the first brigade in the first accident treatment police with a wearing type luminous safety warning lamp, security police field especially the night work safety.

As the police to deal with accidents in road work a long time, if in the evening, even wearing a vest, not warning function under the condition of no light sources, have the police proposed luminous warning lamp unified allocation unit worn on the body: the luminous warning lamp using light-emitting diode LED manufacturing, there are three kinds of light mode, a red light penetration, good warning effect, but the lamp has the advantages of small volume, only matchbox size, easy to wear. Huang Bingjin brigade leader immediately after listening to the advice, and actively strive for superior support, as the road all the police, warden, each configured with a set of the equipment. Group bought the first batch of 25 safety lamp dispensed to the shoulder accident police. After testing, the police handling of incidents with a small light warning light solar barricade lights‍ work on the road, can see the flash in 500 meters. Little warning lamp always protect the police security, also warning the passing vehicles Caution.

solar power beacon light Traffic warning light product features

1, the Traffic warning light uses the environmental protection type cold light source design, not hot, high photoelectric conversion efficiency, strong direction.

2, long service life; the effective service life rotating beacon light‍ of 100000 hours or more.

3, low power consumption, small power consumption distribution is reasonable, effectively improve the efficiency.

4, the warning light has good dustproof, waterproof performance.

Traffic warning light application: widely used in public security, military, transportation, machinery and equipment, entertainment and many other fields.‍

All kinds of signs: (1) warning signs to warn vehicles, pedestrians pay attention to signs of dangerous locations; (2) prohibition sign is a sign to prohibit or restrict the vehicles, pedestrian traffic behavior; (3) indicating an indicator of vehicle, pedestrian road; (4) the sign is pass on the road direction, mark spot, distance information. Auxiliary signs attached to the main symbol, the play a supporting role in mark, at that time, vehicle type, region or the distance, warning, prohibition and other types of reasons.

How according to the color recognition information beacon warning light‍ traffic signs?

Traffic signs color representation of traffic information specific. People can get relevant information according to various color logo.

rotating beacon light Selection and application of LED traffic signs reflective material

1) led traffic signs principle on the road at all levels should use reflective material logo made surface.

2) traffic signs, a road and city trunk road safety warning light‍ should adopt a ~ three grade reflective film; two or three highway and the general city road led traffic signs should adopt the reflective film of level four or above. Four or five grade reflective film can be used for other road four highway and traffic volume is very small.

3) curve section of highway, a highway, city expressway on the sign, multiway intersection and city area, should adopt the above three levels of reflective materials.

4) of portal city expressway, expressway and cantilever logo, to obtain and roadside sign reflecting effect of quite, should choose road side marker for reflecting film rating for the reflective material is high, or the door frame and cantilever mark symbol characters on the switch to the reflector, to improve the solar power beacon light‍ visibility of the night. In important sections of the condition, also can use lighting sign.

C led traffic signs) rules and reference color samples of color.‍

Stars led blue beacon light Performance characteristics of Traffic control baton

1.Traffic control baton uses 6 tree of a new generation of green LED light source, high luminous efficiency, long life, the average service life of 100000 beacon warning light‍ hours.

2 high against the strengthened structure design and optimization of ABS; waterproof and dustproof anti power, can be used in a variety of harsh conditions.

3 the advantages of beautiful appearance, small size stars led blue beacon light‍, light weight, portable, waist and other carrying mode.

4 color to red, for other colors can be produced.

5 light weight. The adoption of new technology, new technology, lamps and lanterns weighs only 138g, reduce the operating personnel, carrying the burden of transportation.

6.Traffic control baton irradiation distance. led blue beacon light‍ The use of advanced optical materials are light, high brightness, within 1000 meters of visually, rain and fog penetration ability for 300 ~ 500 meters.

emergency beacon lights‍