How to install warning lights

1, to install this Beacon Warning Light car faithful reminder: warning light is divided into positive and negative, positive connection port 58, the negative pole screws, otherwise it will not blink
2, when opening T73-A must be careful, because the space is small.
3, the normal wiring methods, wiring, a termination screws, one end of the broken wire to 58 ports, broken lines cross wiring again before flashing normally.

Features and advantages of LED warning lights

Luminous Options include: Always, shiny, strobe, steady / flashing mixed;
Installed base has: L bar, straight bar, folding, drum;
Compared to traditional light sources for Safety Beacon Warning Light it produces less light and longer life than conventional bulbs;
1 watt power LED bulb can replace eight watts, where the use of the process is more energy efficient.

Traffic marking

Road traffic signs "Traffic markings." Middle of the road long yellow or white line, called "lane centerline." It is used to separate from the vehicle, so that they interfere with each other. White dotted line on both sides of the center line, called "lane dividing line", which provides vehicle traveling in the vehicle lane. Non-motor vehicle lane in the non-driving. At the intersection surrounded by a white line is the "stop line." When the red light, all kinds of vehicles should be parked in this line. Equality with the white line on the road like a zebra promenade that lines the composition is the "crosswalk." Pedestrians crossing the road safer here.

Strobe warning lights of the main functions and features

  With high strength, able to adapt to the harsh environment
  High brightness LED strobewarning light, high visibility, use without maintenance
  Power consumption is about half of incandescent bulbs
  Three continuous fast strobe flash form a strong visual impact, warning better
  Multilayer LED curved surround design, lighting uniformity, high brightness, no dead spots, no bad
  Easy installation
  Stable, low maintenance costs.

Selection of warning lights

Depending on the purpose and the work environment and other factors, Solar Warning Light choice should mainly consider the following factors:
The brightness of the ambient light
Degree of distance from the observation point
Lamp life and cost
Degree noisy environment, pollution, and whether there is a strong vibration or shock
The extent of damage and other effects of light burst caused problems for security
Ease of use and maintenance
Different requirements and environmental characteristics should be selected under different products, but maintaining the convenience and economy of what should be considered for all occasions.